English translation for "polymer membranes"
|
- 高分子防水卷材
Related Translations:
- Example Sentences:
| 1. | The modification methods of polymer membrane materials
高分子分离膜材料的改性方法 | | 2. | A new model for the diffusion process of small molecules in dense polymer membranes
小分子在致密聚合物膜中扩散新模型 | | 3. | Preparation of silicone polymer membrane for separation of solvents from lube oil
分离润滑油中脱蜡溶剂的有机硅膜的制备 | | 4. | In situ polymer membrane electrode formation by impregnation reduction and studies on ethylene sensing
还原原位形成膜电极及乙烯催化传感技术研究 | | 5. | Using paracetamol as template molecule , molecularly imprinted polymer membranes with supporting membrane were synthesized through in situ polymerization by uv irradiation
采用紫外光引发原位聚合的方法制备了具有支撑膜的扑热息痛分子印迹聚合物膜。 | | 6. | Using paracetamol as template molecule , molecularly imprinted polymer membranes with supporting membrane were synthesized through in situ polymerization by uv irradiation
摘要采用紫外光引发原位聚合的方法制备了具有支撑膜的扑热息痛分子印迹聚合物膜。 | | 7. | The present status and development trends of membrane separation technology are reported detailed in this chapter and the modification methods of polymer membrane are discussed . 2
本论文详细介绍了膜分离技术的发展现状和应用前景，探讨了高分子固体膜材料的改性方法。 | | 8. | On the basis of the preferential sorption - capillary flow mechanism proposed by sourirajan , the membrane interfacial equilibrium condition in reverse osmosis can be simulated by the hplc experiment . the hplc data on retention times can be used for quantitatively characterizing the dynamic nature on solid polymer membrane surface and physicochemical properties of polymer - solution interface . the experimental technique in this paper can offer definite guidelines for the choice of appropriate membrane material and the better understanding of reverse osmosis separation mechanism
本论文根据索里拉金( sourirajan )提出的“优先吸附?毛细孔流”机理作为选择膜材料的理论依据，用高效液相色谱为手段，模拟反渗透实验平衡条件，确定乙基纤维素固膜材料界面的动力学参数以及求得表征高分子材料在溶液界面上的特性参数，为预测膜材料的化学性质和探讨反渗透分离机理提供了有效手段。 | | 9. | The present work indicates the organic nf membranes and the inorganic nf membranes all have shortages , so develop composite nf membranes that have low cost , mechanically strong and thermally / chemically - resistant , easy to cleanout and good performances is a very important task . in this paper , the preparation of inorganic - organic composite nf membranes were presented . this composite comprise a porous sio2 / al2o3 support substrate , the pore diameters of which ranging from 10 to 15 nm , this inorganic support substrate having a polymer membrane which comprises an polyvinyl alcohol ( pva ) or polyamide ( pa ) densely deposited on at least one of the face surfaces thereof , the structural porosity of such pva and pa membrane ranging from 3 to 5 nm
本论文以开发无机?有机复合纳滤膜为出发点，首先在al _ 2o _ 3多孔微滤膜上利用溶胶?凝胶法制备sio _ 2 al _ 2o _ 3无机复合超滤膜作为无机?有机复合纳滤膜的基膜；选用聚乙烯醇和聚酰胺为表面功能层材料，分别探讨了以羟基丁二酸和磺基水杨酸为混合交联剂，采用浸涂法制备了聚乙烯醇sio _ 2 ? al _ 2o _ 3复合纳滤膜；以均苯二甲酰氯、哌嗪和二胺为单体，采用界面聚合法制备了聚酰胺sio _ 2 ? al _ 2o _ 3复合纳滤膜，并对影响膜性能的诸多因素进行系统研究。 | | 10. | At the same time i also did many primary experments on separator and these polymer membrane can be used in as soft packaging li - ion battery ’ s separator . used polyvinylidene fluoride ( pvdf ) as the basic material , added cotton fibre and starch in , cooked with 100 in boiling water afer 3 hours , the starch inflate , and then acquire porous polymer membrane . in the process of coating polyester film , copper foil and aluminum boil were used to as carrier ,
选用的基体材料为pvdf ,同时向其中添加棉纤维和淀粉,最后利用100沸水对隔膜进行3小时蒸煮处理使淀粉溶胀,从而达到造孔的目的。在涂布工艺的筛选中,通过对麦腊片、铜箔、铝箔进行筛选,最后选定以铜箔为载体来进行涂布处理。当以铜箔为载体时,可以使隔膜正反两面物理性质达到基本一致。 |
- Similar Words：
- "polymer materials processing lab" English translation, "polymer matrix" English translation, "polymer mechanics" English translation, "polymer melt" English translation, "polymer melt temperature" English translation, "polymer microsphere" English translation, "polymer mix" English translation, "polymer model" English translation, "polymer modification" English translation, "polymer modified asphalt" English translation
|
|
|
